Ventuz - Compulite DMX Patching

[publigood]

Hi, this probably sounds like an obsolete "how to" request (the usage of Ventuz for our projects is very very easy) but we're stuck a little:

the setup is based on a Ventuz 3 beta (32) with Designer License and a Compulite Vector Blue.
We're trying to bind the two, sending DMX values from the Compulite to a DMX In node in Ventuz. Once the DMX In Range1 is created in Ventuz (with an ideal channel set to be 511), the error log/report says that this Channel is unusable.
The same for the other 0-4095 channels, any range.

Which way to follow in order to let Ventuz communicate via DMX with the Compulite Vector Blue?

Thank you in advance.

Manuel

[chriss0212]

hi manuel

is it possible, that you try to send artnet? if you try so: you need to write your own c# script! as far as i know, the sound light dmx card for dmx is not supported anymore!

take a look here...there is what you need to get in dmx....but not artnet!

greetz

christian

[Karol]

Would this help:
http://inside.ventuz.com/2012/01/dmx4all-with-ventuz3/

Cheers

[chriss0212]

uuhps...forgot the link

thx karol