Datapath Vision LC capture cards

All other topics about Ventuz 5 here.

Moderator: Support

Post Reply
Total-Image
Posts: 28
Joined: 11 Sep 2015, 14:42

Datapath Vision LC capture cards

Post by Total-Image » 28 Feb 2018, 09:44

Anyone successfully used the Datapath Vision LC capture cards (LC-HD2 or LC-SDI) with Ventuz?

Rogier
Attachments
Vision-LC-HD2-Warning.jpg

User avatar
Eric_RD
Posts: 103
Joined: 04 Jun 2014, 14:01
Contact:

Re: Datapath Vision LC capture cards

Post by Eric_RD » 28 Feb 2018, 13:40

Have you tried the "Vision" drivers instead of the "VisionLC"?
https://www.datapath.co.uk/datapath-arc ... ll-v7-17-6

We only have "VisionSC" Displayport Cards, so I can't tell if it works for you...

User avatar
Dierk Ohlerich
Posts: 74
Joined: 10 Jul 2012, 09:01
Location: Hamburg, Germany

Re: Datapath Vision LC capture cards

Post by Dierk Ohlerich » 28 Feb 2018, 14:04

From the manual : "Ventuz supports the Vision-AV and Vision-SC series, including the VisionSC-HD4+ board. "

Vision LC is new, and not yet supported. I am pretty sure we will add support for this, but no schedule has been made yet.

-- Dierk
-- Dierk Ohlerich

Total-Image
Posts: 28
Joined: 11 Sep 2015, 14:42

Re: Datapath Vision LC capture cards

Post by Total-Image » 28 Feb 2018, 14:08

Yes, in our test system we have these SC cards as well.
It's already several weeks ago that I tested the LC card for the first time and what i can remember is that when I replaced the card with the LC Card it first worked (probably with the SC drivers) I then installed the LC drivers and it was not working anymore.
Tried to uninstall the LC drivers, reinstall the SC drivers, etc, but without any success.
According the manual, Ventuz does not support the LC range of cards.

Rogier

Post Reply