Implement all VMS Commands from Ventuz 4 in Ventuz 5
Posted: 11 Oct 2016, 16:50
Hi,
there is at least one command missing in the VMS Telnet tool on port 19405. INST should give you the Ventuz version.
On the TCP Server for Ventuz 4 on port 19401 it works just fine.
Background:
I made a small tool for maintaining our rental-workstations, which gives you a quick health overview (for example: Is Ventuz up to date?) and manages a few things like the Two Machines - Same ID issue.
It works well for Ventuz 4 but I can't find an easy way to get the Ventuz 5 version number independently from any Ventuz config.
Thanks a lot in advance, Eric
there is at least one command missing in the VMS Telnet tool on port 19405. INST should give you the Ventuz version.
On the TCP Server for Ventuz 4 on port 19401 it works just fine.
Background:
I made a small tool for maintaining our rental-workstations, which gives you a quick health overview (for example: Is Ventuz up to date?) and manages a few things like the Two Machines - Same ID issue.
It works well for Ventuz 4 but I can't find an easy way to get the Ventuz 5 version number independently from any Ventuz config.
Thanks a lot in advance, Eric
