Looking for some insight on how camera outputs are prioritized.
I am trying to match a setup I have in C4D that consists of 3 cameras
- Cam1 that views my 3d scene
- Cam2 that matches same perspective and then perspective projected onto a 2D plane.
- Cam3 That renders a perpendicular top down view point of the camera remapped object.
I have gotten half way there in Ventuz and am able to remap my 3D scene onto a 2D plane which seems to be working properly.
See attached scene I am working on.
The goal is to use this so that I can project onto a flat plane with a projector and then update the perspective viewpoint for a live moving camera. Ultimately will have 3d camera tracking attached.
Any insight to getting this to work would be extremely appreciated. Perhaps there is another way to do this. I'm relatively new to Ventuz so be kind...
Thanks!
Hello Ventuzians!
THE FORUMS ARE CLOSED!
Please join our discord server HERE!! << click me
We are shutting our Ventuz Forum, but don't worry, it will all be archived for you to search in if you have a query. From now on, please add all your comments, questions or observations into our Discord Server
Thanks for the great time - see you on discord!!
Dee, Karol, Daniel and the whoooole Product and Support team!
THE FORUMS ARE CLOSED!
Please join our discord server HERE!! << click me
We are shutting our Ventuz Forum, but don't worry, it will all be archived for you to search in if you have a query. From now on, please add all your comments, questions or observations into our Discord Server
Thanks for the great time - see you on discord!!
Dee, Karol, Daniel and the whoooole Product and Support team!
Camera remapping and alternate render view
Moderator: Support
Camera remapping and alternate render view
- Attachments
-
- TextureRemap12.vza
- (32.59 KiB) Downloaded 547 times
Re: Camrea rempaing and alternate render view
Hope this helps a bit
Enjoy
Dee
Enjoy
Dee
- Attachments
-
- 4CamAngles.vpa
- (629.55 KiB) Downloaded 495 times
Re: Camrea rempaing and alternate render view
Thanks Dennis,
This was helpful and saw this in an earlier Archive Forum post... but did not solve the challenge.
It appears that if I have a camera in my master scene (which is needed to do the camera remapping) It will not use the camera data in the new scene with the Scene Port.
I attached another photo of the end result I am trying to achieve. This is a "top down" perspective of the pre-camera mapped texture which would be set to the desired viewpoint that would update based on broadcast camera location.
Thoughts?
This was helpful and saw this in an earlier Archive Forum post... but did not solve the challenge.
It appears that if I have a camera in my master scene (which is needed to do the camera remapping) It will not use the camera data in the new scene with the Scene Port.
I attached another photo of the end result I am trying to achieve. This is a "top down" perspective of the pre-camera mapped texture which would be set to the desired viewpoint that would update based on broadcast camera location.
Thoughts?
Re: Camrea rempaing and alternate render view
Also... Open to looking at this in V5 as it seems there is more camera control here!
Re: Camrea rempaing and alternate render view
Hey CJ,
did you get this answered?
-E
did you get this answered?
-E