Hello Ventuzians!
THE FORUMS ARE CLOSED!
Please join our discord server HERE!! << click me
We are shutting our Ventuz Forum, but don't worry, it will all be archived for you to search in if you have a query. From now on, please add all your comments, questions or observations into our Discord Server
Thanks for the great time - see you on discord!!
Dee, Karol, Daniel and the whoooole Product and Support team!
THE FORUMS ARE CLOSED!
Please join our discord server HERE!! << click me
We are shutting our Ventuz Forum, but don't worry, it will all be archived for you to search in if you have a query. From now on, please add all your comments, questions or observations into our Discord Server
Thanks for the great time - see you on discord!!
Dee, Karol, Daniel and the whoooole Product and Support team!
Ventuz with Watchout
Moderator: Support
Ventuz with Watchout
I am currently trying to display a Ventuz output resolution of 3840X1080 from an ATI Card using 2 DVIs. I am using Watchout to do the blending on 2 HD projectors. The watchout servers are using 2 capture cards that can only accept 1920x1080 each. However, there was noticeable sync and tearing after we blend them together. Any solutions to this?
-
- Posts: 666
- Joined: 18 Jan 2012, 20:56
- Location: wuppertal
- Contact:
Re: Ventuz with Watchout
hi progenix
what a setup......first of all: why are you using a realtime software to feed a media server?
what grafics card are you using? if it is a consumer card, it could be, that both outputs are not frame synched!
which grabber gards are you using...is it a genlocked setup?
tearing: on one output or do you mean delay between both projectors?
if you are using a pro card like the firepro i would think your problem is related to watchout!
greetz
christian
what a setup......first of all: why are you using a realtime software to feed a media server?
what grafics card are you using? if it is a consumer card, it could be, that both outputs are not frame synched!
which grabber gards are you using...is it a genlocked setup?
tearing: on one output or do you mean delay between both projectors?
if you are using a pro card like the firepro i would think your problem is related to watchout!
greetz
christian
Re: Ventuz with Watchout
If you are only using Watchout to do the blend, personally I would use Ventuz to produce the overlap but choose a projector that has blending built in.
Peter
Peter
-
- Posts: 290
- Joined: 18 Jan 2012, 11:36
- Location: Dubai, United Arab Emirates
- Contact:
Re: Ventuz with Watchout
Totally agree with Peter. Ditch Watchout. Using Watchout simply for edge blending is a budget killer and is actually more limiting than creating the overlap in Ventuz.
Re: Ventuz with Watchout
Our new Edge Blending, Warping and Shaping toolset for V4 is almost ready as well!
Re: Ventuz with Watchout
Hi ErikB,
Any timeline on when these new tools for V4 will be out? I am current using V3. Will the tools in suffice for now?
Charles
Any timeline on when these new tools for V4 will be out? I am current using V3. Will the tools in suffice for now?
Charles
-
- Posts: 290
- Joined: 18 Jan 2012, 11:36
- Location: Dubai, United Arab Emirates
- Contact:
Re: Ventuz with Watchout
We are still using V3 as well. The EdgeBlending in V3 is not the best but does a decent job. But if you do that with the projectors there is nothing stopping you to use Ventuz for the rest.
Re: Ventuz with Watchout
New tools for Shaping and Blending should be in the next point release, hopefully. (so 4.02). Let's say with the way things look right now, it should be a very early Xmas present. Of course we cannot be 100% sure, as things can always go wrong, but so far initial feedback is excellent.
-E
-E
-
- Posts: 9
- Joined: 17 Mar 2015, 03:54
Re: Ventuz with Watchout
i'm also both ventuz & watchout user,
- did you test your ventuz 2 output directly to 2 monitors? is the video sync'd up?
- if yes, it is probably you have problem with your capture card?
it is better if we don't mixed up between this 2 software especially with synchronized video capture,
if you have less video playback (e.g. 5 videos) it is very easy to bring that files to ventuz node.
if we are talking about projection mapping and output mesh warping, ventuz 4 new tool will handle it easily.
- did you test your ventuz 2 output directly to 2 monitors? is the video sync'd up?
- if yes, it is probably you have problem with your capture card?
it is better if we don't mixed up between this 2 software especially with synchronized video capture,
if you have less video playback (e.g. 5 videos) it is very easy to bring that files to ventuz node.
if we are talking about projection mapping and output mesh warping, ventuz 4 new tool will handle it easily.