Page 1 of 1
keystone
Posted: 11 Oct 2014, 17:23
by chriss0212
hi all.....
we developed a simple module to make a keystone corection inside of ventuz
https://www.hightail.com/download/UlRUe ... NVZjR05Vag
greetz
christian
Re: keystone
Posted: 04 Nov 2014, 17:13
by Götz_B
Hey!
What do you use it for? Are you not satisfied with the Shaping Tool or do you use it dynamically in the scene .... ?
Or just because you can ?
Re: keystone
Posted: 05 Nov 2014, 19:27
by chriss0212
hi götz...
yes we can
.....no....first of all: havent checked, if i ventuz shaping can do keystoning with automatic correction of the homographic distortions?!
next: i dont need a render target for this setup...i am correcting the camera matrix!
greetz
christian
Re: keystone
Posted: 06 Nov 2014, 12:51
by chriss0212
hi götz
what i am doing with our tool....you have to compare with the 3d projection settings in the shaper. i would say, that our tool is more efficient and faster in calibrating because i have just to move the 4 corner points and all camera settings are calibrated.
greetz
christian
Re: keystone
Posted: 25 Apr 2019, 13:44
by Wuzzi
Nice Job!
could you give an example or a little hint how you solved this?
