Ventuz Forum

Any plans to support the HAP-Codec natively in Ventuz?
And before asking - why...
Size is in the range of mpeg2, but resolution can be higher than FullHD, quite less usage of CPU and the possibility of Alphachannel.

http://vdmx.vidvox.net/blog/hap

/Thomas

Thats the reason to use a Multicast Address in settings of your OSC-Software.
It will send the commands to all receiver within the range.
See:
https://en.wikipedia.org/wiki/Multicast_address

Hi, assuming you are living in DXB ask for threemonkeys, they are the best in this aera. Having a 3 - 12 month time and some skills in 3D and C# your prerequisites are fine. And... of course, some money. Usually you will not find a Ventuz-Programmer under 2500AED a day, high skilled crack´s up to mo...

I think requesting a license is not the same port as Web-Access (Port 80).
Try direct Access to internet without any external firewall, this should work.

There is a roadmap for V5?

Only one gpu is supported, no crossfire, sli or "X2"

On some mainoards / notebooks you can switch off the intel gpu inside the bios / uefi

Did you suceed with BM Intensity Pro ? yes
Any specific configurations ? no, just make shure to choose your capture settings in the system panel, after installing the BM-software.

Last week I spoke with a reseller of BM, and he told me that the latency of the USB3 products are not accectable in live 3D because of it´s latency. If you are looking for a good vaue of a capture card and 720p up to 60 hz is enough for you, try BM Intensity Pro. Cheap and works fine in Ventuz V3 an...

If 12 x 1280 x 720 is enough for your project, give a try to an 7970 or R9 280x / R9 290 (with Minimum one DVI duallink and 2 (mini)-dp Outputs.
Connect it to 3 datapath x4 using active duallink dp-Adapters.
Will work fine, only one machine, no cluster needed.

/Thomas