Program port not connected cancels cueing on all machines

All other topics about Ventuz Director here.

Program port not connected cancels cueing on all machines

Postby Kobbi » 15 Feb 2017, 18:25

Hi guys,
I need to set topology of two ventuz machines for playout and one director which is realy simple. However I need one of ventuz machines to be primary and second one to be a backup. Here comes a catch.... If one of ventuz machines goes wrong and program port is disconnected, director does not cue any template because of port not connected error. Is there a way to force director to ignore this port not connected error and cue templates on alive computers?

Best regards,
Kobbi
Kobbi
 
Posts: 24
Joined: 12 Feb 2012, 15:19

Re: Program port not connected cancels cueing on all machine

Postby Daniel Willer » 17 Feb 2017, 15:13

Hi kobbi

Just additional topology just using the backup topology. In case of a failure you just switch the active Topology inside the Director.

Cheers
Daniel
User avatar
Daniel Willer
 
Posts: 306
Joined: 06 Jan 2012, 18:12


Return to General Discussion

cron