Page 1 of 1
RemoteControlling via Network/Internet?
Posted: 15 Jul 2013, 11:09
by diezweiundvierzig
Hi @all.
Is there any possibility for remote controll an Ventuz-Machine over internet like TeamViewer o.s.?
The main problem is, that the renderer should be visible - and I found nothing working (cisco, teamviewer,..).
any ideas/workarounds?
Re: RemoteControlling via Network/Internet?
Posted: 15 Jul 2013, 20:26
by chriss0212
if you use virtual fullscreen it should work!
greetz
christian
Re: RemoteControlling via Network/Internet?
Posted: 16 Jul 2013, 05:45
by joysprod
Virtual FullScreen mode allowed me to control via Splashtop from an iPad. Works very well.
Peter
Re: RemoteControlling via Network/Internet?
Posted: 16 Jul 2013, 08:19
by diezweiundvierzig
thx for that. but the performance in virtual fullscreen isn't that what I need!
Re: RemoteControlling via Network/Internet?
Posted: 19 Jul 2013, 21:30
by joysprod
I think the only way to do it maybe is to have 2 Ventuz machines. One in Virtual full screen mode. This is the one you control and get visual feed back on your control device while the other machine via osc is displaying the full image to the proper display. Haven't tried it myself but should be possible?
Peter
Re: RemoteControlling via Network/Internet?
Posted: 22 Jul 2013, 08:19
by diezweiundvierzig
thanks for the idea, but this isn't what I want!
I want to control via internet the whole ventuz-installation with a range of VentuzMachines and what they are doing in realtime!
Re: RemoteControlling via Network/Internet?
Posted: 22 Jul 2013, 08:31
by gabrielefx
diezweiundvierzig wrote:thanks for the idea, but this isn't what I want!
I want to control via internet the whole ventuz-installation with a range of VentuzMachines and what they are doing in realtime!
radmin
Re: RemoteControlling via Network/Internet?
Posted: 07 Aug 2013, 09:27
by ErikB
Use OSC, that is what it is for. Of course, over the net you are not certain to get 100% synchronous triggering...